I am in need of the MPG plug and pins for my MPU11 board.
Can someone tell me what the make,style,or part number to the mate of the MPG socket is?
I had purchased the Mach3/Ajax 3rd party kit back in Oct. 2009, ser.# 1015090082
Is there an illustration or drawing available that lists what the mfr. Part # for the different sockets or plugs on these boards? Could these parts be added to your website for purchase in the near future?
After numerous interruptions and distractions over the past few years I recently got my Bridgeport Series 1 Interact running!
Thank you, John
MPU11 and GPIO4D PARTS
Moderator: cnckeith
-
- Posts: 8
- Joined: Thu Mar 18, 2010 1:24 pm
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: 1015090082
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Lake Villa,IL
-
- Posts: 431
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: MPU11 and GPIO4D PARTS
Are you building your own MPG? I have attached a schematic that includes the pin-out for the cable we use with our MPG. The 6' cable is available for $50 alone and is included with our MPG.
- Attachments
-
- MPU11_AND_CABLES.pdf
- (75.5 KiB) Downloaded 264 times
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 8
- Joined: Thu Mar 18, 2010 1:24 pm
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: 1015090082
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Lake Villa,IL
Re: MPU11 and GPIO4D PARTS
Yes I have built my own MPG unit and am in need of just the female plug and crimp pins to finish. Any help on the part # and make would help. I would like to purchase just the rectangular plug and pin? Thank you, John
-
- Posts: 7
- Joined: Thu Jan 03, 2013 9:39 am
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: 816120601
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: MPU11 and GPIO4D PARTS
Did you have any luck finding the type/part number as I need a spare plug for my setup?