Wired vs wireless
Moderator: cnckeith
-
- Posts: 129
- Joined: Fri Mar 19, 2010 2:38 pm
Wired vs wireless
I have always used the wired pendant and mpg. How does the touch screen pendant and wireless mpg compare?
-
- Posts: 66
- Joined: Sun Oct 06, 2019 8:50 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Wired vs wireless
I was squeamish before I bought the wireless MPG, as I remember the days when wireless mice for computers would be skippy, making them unusable. I am happy to say the wireless MPG seems to be instantaneous and without skips. It makes set up much easier for me, as I have no touch pads or other automation. I would recommend it.
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Wired vs wireless
The wireless pendant works fine...but it is wireless and does use the USB port.
If it works when connected it works.
If you have a control like OAK or All in One DC you can buy the header connector and the wired MPG and use it.
Choice is up to you.
Wireless is nice for large format machines where the tethered MPG is inconvenient.
If it works when connected it works.
If you have a control like OAK or All in One DC you can buy the header connector and the wired MPG and use it.
Choice is up to you.
Wireless is nice for large format machines where the tethered MPG is inconvenient.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 129
- Joined: Fri Mar 19, 2010 2:38 pm
Re: Wired vs wireless
I have the wired pendant and mpg for each machine. It looks like the wireless mpg can do a lot more than the wired one. I also wonder how the touch screen monitor compares to the wired jog pendant. A lot of high end machine controls have gone to a touch screen monitor. Is it possible to have the wireless mpg display distance to go?
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Wired vs wireless
To answer you question, NO, not that I am aware of. Wireless pendant only shows current position.converterking wrote: ↑Sun May 17, 2020 9:13 pm I have the wired pendant and mpg for each machine. It looks like the wireless mpg can do a lot more than the wired one. I also wonder how the touch screen monitor compares to the wired jog pendant. A lot of high end machine controls have gone to a touch screen monitor. Is it possible to have the wireless mpg display distance to go?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ