All-in-one problems: motors jump when commanded
Moderator: cnckeith
-
- Posts: 26
- Joined: Fri Feb 11, 2011 5:59 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: c19288
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: All-in-one problems: motors jump when commanded
Any ideas? Anyone home?
-
- Posts: 80
- Joined: Tue Jul 20, 2010 4:07 am
Re: All-in-one problems: motors jump when commanded
Help this man.
-
- Posts: 56
- Joined: Fri Jun 10, 2011 8:40 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: All-in-one problems: motors jump when commanded
PCM please Answer the following Question.
1) From the Previous post It is clear that your x-axis and Y-axis work Perfectly .....Now the problem is in Z-axis ?Am i right
2) What type of Z-axis Motor and encoder you used?? New or the Existing??
3) Can you please Take off the motor from the machine 1st ....
Also please post you report file for better visualization
1) From the Previous post It is clear that your x-axis and Y-axis work Perfectly .....Now the problem is in Z-axis ?Am i right
2) What type of Z-axis Motor and encoder you used?? New or the Existing??
3) Can you please Take off the motor from the machine 1st ....
Also please post you report file for better visualization
-
- Posts: 86
- Joined: Sat Dec 27, 2014 4:53 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: All-in-one problems: motors jump when commanded
For the search feature here onsite. The fix for missing Motor F or R reverse for axis. part or right side Screen is missing:
Control Panel -> Appearance and Personalization -> Display.
Choose "Smaller (100%)".
Control Panel -> Appearance and Personalization -> Display.
Choose "Smaller (100%)".