encoders TYPE
Moderator: cnckeith
-
- Posts: 10
- Joined: Fri Aug 27, 2010 3:34 pm
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
encoders TYPE
i want to buy DC3IO i have 30M4-59 SERVOS, I SEE YOU HAVE ENCODERS FOR SALE WHIT 6 mm, 1/4", 3/8", and 1/2" hollow shaft sizes BUT MY SERVO HAVE 17MM SHAFT , WHAT TYPE OF ENCODER I NEED TO BUY? THANKS
-
- Posts: 83
- Joined: Sun Sep 19, 2010 3:24 pm
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: A50391
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: encoders TYPE
http://www.microesys.com/drcEncoders/data.html
All sorts of encoders available here. Typically these kits come with 2000 counts per revolution.
All sorts of encoders available here. Typically these kits come with 2000 counts per revolution.
-
- Posts: 83
- Joined: Sun Sep 19, 2010 3:24 pm
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: A50391
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: encoders TYPE
http://www.dynapar.com/uploadedFiles/_S ... 034_2_.pdf
Same brand they use in their kits. Can't find one that's 17 mm though.
Same brand they use in their kits. Can't find one that's 17 mm though.