Allin1 DC controller < be sure to install unlocks>
Moderator: cnckeith
-
- Posts: 15
- Joined: Sat Feb 03, 2018 11:42 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: K102811
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Fowler MI
Allin1 DC controller < be sure to install unlocks>
I have finally slayed the installation dragon. i got a clean system test just in time to find out the the intercon faults out and is unusable. UGH. "option 509 not available" and nothing offred if the troubleshooting section of the intercon operation manual explaning what this might be. i surfed the forum to find parameter 36 should be set to 1 and i tried that and with no success i returned #36 back to 0. Can anybody help me take hill 509? attached is the report just before the system test passed.
- Attachments
-
- report_0517171749_2019-06-11_18-34-30.zip
- (118.75 KiB) Downloaded 73 times
Re: Allin1 DC controller
Locate your software unlock codes sheet.
Enter the software unlock code for Intercon (#300).
Enter the software unlock code for Intercon (#300).
-
- Posts: 15
- Joined: Sat Feb 03, 2018 11:42 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: K102811
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Fowler MI
Re: Allin1 DC controller
thank you
we must have overlooked that with all of the other activity on this build.
we must have overlooked that with all of the other activity on this build.