Is there library's of videoes on programming with intercon ? My machine had an Anillam M controll before and intercon is going to need time,although I
havent run the machine much. Had trouble with a depth repeat cutting a slot on x with a feed down on each end .
Thanks Don s
Intercon programing videoes
Moderator: cnckeith
-
- Posts: 109
- Joined: Sat Oct 06, 2018 9:35 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Intercon programing videoes
Not comprehensive but this will get you started.
http://www.centroidcnc.com/video_milltrain_index.html
http://www.centroidcnc.com/video_milltrain_index.html
-
- Posts: 7
- Joined: Sun Jul 15, 2012 2:39 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: A900283 ID 0807120528
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: Intercon programing videoes
Thanks Ill get watching