Help with Allin1dc CNC11 to CNC12 upgrade

[RandyL]

Got the Hunyang vfd drive installed.

Machine spindle is running again.


couple of odd things noticed and not sure why:
1, My air operated brake does not release now with S command, stays locked. Not sure why it is not releasing. I removed air pressure for now.

2, The vcp wont let me change incrementaly, it is on .001 and i cant select either of the two vcp buttons.


Other than that seems to be back in business.
Any suggestions would be appreciated.

[Samandkimberly]

Re item 2: My VCP won’t let me change increment amounts either; this is one of the last issues I need to fix on my recent installation. I’ve been getting around it by using alt-j and changing it on the keyboard.

Sam

[martyscncgarage]

Re item 2: My VCP won’t let me change increment amounts either; this is one of the last issues I need to fix on my recent installation. I’ve been getting around it by using alt-j and changing it on the keyboard.

Sam

If you guys have wireless MPG's this is by design.
Use the MPG or turn off the MPG and use VCP. Can't do both.

[Samandkimberly]

Hi Marty,

I don’t have the wireless MPG, but I’ll check the settings...maybe it’s turned on and I don’t know it. But everything else on the VCP works normally; wouldn’t that affect more than just the increment amount buttons?

Sam

[martyscncgarage]

Hi Marty,

I don’t have the wireless MPG, but I’ll check the settings...maybe it’s turned on and I don’t know it. But everything else on the VCP works normally; wouldn’t that affect more than just the increment amount buttons?

Sam

No, its a specific issue we were testing disregard if no wireless MPG.