Greetings,
I have an older 3 axes cnc knee mill.
Model M-10, Ser. No. 1418
My CPU inside cabinet went bad and my
computer geek says time for new one.
What software do in need to purchase and
download for Windows 10.
Keep in mind, I do very simply programs
that I program at machine.
Thanks for advise.
up grade
Moderator: cnckeith
-
MontanaMoon
- Posts: 2
- Joined: Fri May 19, 2023 12:56 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: model 10 ser. 1418
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: Yes
-
cnckeith
- Posts: 7427
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: up grade
The Centroid Allin1DC CNC controller kit would allow you to reuse most of the electrics in the cabinet and use a modern PC with the latest CNC12 software and Windows 10 or 11
https://shopcentroidcnc.com/allin1dc-cnc-controller/
https://shopcentroidcnc.com/allin1dc-cnc-controller/
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html