Encoder Basics
Moderator: cnckeith
-
- Posts: 114
- Joined: Wed Sep 11, 2013 1:31 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 0916130849
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Encoder Basics
http://www.centroidcnc.com/sem_dc_servo ... rofit.htmlMountainman wrote: ↑Wed Sep 05, 2012 9:01 am Anybody have clear written instructions on installing encoder to SEM servo motor. Any warning out there on what I should not do or be careful of ? I have a 1991 Bridgeport V2XT. I've seen the tutorial, but I am sure a pic means one thing to one person and something else to another.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 111
- Joined: Tue Aug 14, 2018 10:49 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: noneC120192
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Denver, CO
Re: Encoder Basics
Ummm . . . I think I bought the wrong encoder - will this one work on an Acorn board?
Thanks very much for your help,
Gary
https://smile.amazon.com/gp/product/B00 ... UTF8&psc=1
Thanks very much for your help,
Gary
https://smile.amazon.com/gp/product/B00 ... UTF8&psc=1
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Encoder Basics
NoGBCues wrote: ↑Tue Sep 11, 2018 6:22 pm Ummm . . . I think I bought the wrong encoder - will this one work on an Acorn board?
Thanks very much for your help,
Gary
https://smile.amazon.com/gp/product/B00 ... UTF8&psc=1
Go to Automationtechnologies.com, look for line driver differential encoder....
2000 line or better....
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 15
- Joined: Sun Sep 30, 2018 3:40 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Encoder Basics
Im finding it hard to pin down the right encoder that isnt a chinese clone.
Could someone tell me if this is would be suitable
https://uk.rs-online.com/web/p/rotary-encoders/9189095/
data sheet
https://docs-emea.rs-online.com/webdocs ... 4a8d5c.pdf
I looks like it could be, but the signal voltages look low, after reading a post a couple of pages back.
any info would be helpful thanks.
Could someone tell me if this is would be suitable
https://uk.rs-online.com/web/p/rotary-encoders/9189095/
data sheet
https://docs-emea.rs-online.com/webdocs ... 4a8d5c.pdf
I looks like it could be, but the signal voltages look low, after reading a post a couple of pages back.
any info would be helpful thanks.
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Encoder Basics
No, that is a push/pull.osrix25 wrote: ↑Mon Oct 01, 2018 11:16 am Im finding it hard to pin down the right encoder that isnt a chinese clone.
Could someone tell me if this is would be suitable
https://uk.rs-online.com/web/p/rotary-encoders/9189095/
data sheet
https://docs-emea.rs-online.com/webdocs ... 4a8d5c.pdf
I looks like it could be, but the signal voltages look low, after reading a post a couple of pages back.
any info would be helpful thanks.
You want a Line Driver/Differential Encoder A, /A, B, /B, Z, /Z, COM, +5VDC
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 57
- Joined: Mon Jan 22, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clifton Illinois
Re: Encoder Basics
The URL is actually https://www.automationtechnologiesinc.com/martyscncgarage wrote: ↑Tue Sep 11, 2018 9:05 pmNoGBCues wrote: ↑Tue Sep 11, 2018 6:22 pm Ummm . . . I think I bought the wrong encoder - will this one work on an Acorn board?
Thanks very much for your help,
Gary
https://smile.amazon.com/gp/product/B00 ... UTF8&psc=1
Go to Automationtechnologies.com, look for line driver differential encoder....
2000 line or better....
Marty
-
- Posts: 57
- Joined: Mon Jan 22, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clifton Illinois
Re: Encoder Basics
Automation Direct has a lot of choices and in my experience they are good quality encoders:
https://www.automationdirect.com/adc/Sh ... 22&start=0
https://www.automationdirect.com/adc/Sh ... 22&start=0
-
- Posts: 15
- Joined: Sun Sep 30, 2018 3:40 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Encoder Basics
Thanks Marty its confused me as it says I can be wired for Push-Pull, RS422 or open collector. but i see no Z now. only 2 channelin differential mode.martyscncgarage wrote: ↑Mon Oct 01, 2018 11:28 amNo, that is a push/pull.osrix25 wrote: ↑Mon Oct 01, 2018 11:16 am Im finding it hard to pin down the right encoder that isnt a chinese clone.
Could someone tell me if this is would be suitable
https://uk.rs-online.com/web/p/rotary-encoders/9189095/
data sheet
https://docs-emea.rs-online.com/webdocs ... 4a8d5c.pdf
I looks like it could be, but the signal voltages look low, after reading a post a couple of pages back.
any info would be helpful thanks.
You want a Line Driver/Differential Encoder A, /A, B, /B, Z, /Z, COM, +5VDC
Marty
I think europe uses different naming, for example, search "Line driver" in RS, or farnell and it comes up with a semi conductior rather than any kind of rotary encoder.
Anyway Ive found Koyo TRDA-2E2500VD in Europe. so that will do
![Smile :)](./images/smilies/icon_e_smile.gif)
https://www.plcdirect.eu/products/encod ... a-2e2500vd
for anyone else this side that might need one.
-
- Posts: 3102
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Encoder Basics
Line Driver = RS422
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.