Centroid Acorn Ethernet and Firmware Heartbeat status LED lights explained
Posted: Mon Jan 29, 2018 5:39 pm
by cnckeith
Centroid Acorn Ethernet and Firmware Heartbeat status LED lights explained
Re: Centroid Acorn Ethernet and Firmware Heartbeat status LED lights explained
Posted: Wed Mar 20, 2019 2:57 pm
by cnckeith
Acorn_rev4 and CNC12 v4.14+ New Feature: Acorn BBG Heart beat light has been piped out to the Acorn 24 vdc Power indicator LED so now that LED serves two purposes.
1.) confirms 24 vdc logic power has been applied to the Acorn board
2.) echos the BBG "heartbeat" led so that it is easier to see, confirming that the BBG has booted Centroid Acorn firmware and is ready to run.
Re: Centroid Acorn Ethernet and Firmware Heartbeat status LED lights explained