Coordinate display overlapping in graphing.

[kman1967]

Just installed Version 5.08. AcornSix. I was excited to read this was fixed. Almost but not quite.

See attachment

[kman1967]

Just installed version 5.08 of CNC12. AcornSix. Had issue wit overlapping coordinates in graphing while running job. This was apparently fixed in this version but see the attached pic.

[kman1967]

Trying to add image....

[kman1967]

Attached report. Sorry for the multiple posts

[kman1967]

Just an update. After running a sample program that included my A axis I realized the DTG display for the A axis was missing and noticed the overlay at the top was actually counting down on the move. SO, the DTG for the A axis field is in the wrong area on the screen.

Should note that this is only in the graph screen while running a job

[cnckeith]

thanks, we found this a while ago and it has been fixed in v5.1 which will hopefully release soon.

https://centroidcncforum.com/viewtopic. ... 939#p85939

[cnckeith]

what kind of machine is this AcornSix installed on? photo album link?

[kman1967]

This is a custom machine that I built.

[cnckeith]

This is a custom machine that I built.

cool you have some odd steps per rev and turns ratios, from that i couldn't figure out what kind of machine it is

[kman1967]

The stepper motor drive system come from Avid CNC. That's the first thing everyone mentions is the turns ratio but they run great