Need a small motor for lathe spindle
Posted: Mon Mar 25, 2024 2:50 pm
First, I already have a couple of Teknic Clearpath MCVC and MCPV motors. These are not the same as the SDSK motors, they're primarily designed to be run from software. Looking at the various operating modes, I don't see how I can control these from Acorn because there doesn't seem to be a 0-10V input. Before I start looking at buying a new motor, can anyone tell me if they have a Teknic MCVC or MCPV motor working with Acorn as a lathe spindle motor? If so, what mode are you using and how do you have it wired up?
I have an email in to Teknic but haven't heard back yet.
If these won't work, can you recommend a small NEMA23 sized motor I can use for this? The lathe is very small, doesn't need to be massively powered. It currently has a 0.5HP DC motor in it. here's some info on what I have: https://centroidcncforum.com/viewtopic.php?f=60&t=9955
I'd be looking for something cheap.
I have an email in to Teknic but haven't heard back yet.
If these won't work, can you recommend a small NEMA23 sized motor I can use for this? The lathe is very small, doesn't need to be massively powered. It currently has a 0.5HP DC motor in it. here's some info on what I have: https://centroidcncforum.com/viewtopic.php?f=60&t=9955
I'd be looking for something cheap.