Brand New WMPG-4 Pendant with Loss Rf

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

cnckeith
Posts: 7334
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Brand New WMPG-4 Pendant with Loss Rf

Post by cnckeith »

prb00a@gmail.com wrote: Thu Mar 07, 2024 5:53 pm The antenna is 'not' paired to the pendant is that is a requirement. The pendant was purchased on 03 April 2023 but was received without the USB receiver; only pendant and antenna. Assuming it was a separate item, I purchased a USB receiver 15 Feb.'24.
this is your issue.

the WMPG kit looks like this. you get everything in the photo below
wmpg kit.png
https://shopcentroidcnc.com/shop/wirele ... l-pendant/
the kit USB and WMPG-6 are pre paired ready to go.

if you bought them separate then they need paired.

we sent you an email on how to pair the USB with the pendant
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply