Hi all,
first time on here, but recently had my ECMO PC 155 lathe controller die on me. I love the machine mainly for its live tooling capabilities and the overall size. I see a lot of people have success with the Acorn on the smaller EMCOs but am wondering if I can run the live tooling through the Acorn or if am i going to need to go with a Hickory? I didn't see mention of c-axis or live tool support on the Acorn lathe license. Sorry if this is something that has been beaten to death already
Thanks,
EMCO 155 Lathe
Moderator: cnckeith
-
- Posts: 2010
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: EMCO 155 Lathe
C-Axis is no problem with Acorn.
Live tooling on/off can be done with Acorn too, second spindle output is on Acorn6, be we are still waiting for software update to control it individually.
Uwe
Live tooling on/off can be done with Acorn too, second spindle output is on Acorn6, be we are still waiting for software update to control it individually.
Uwe