Quick Tip: Setting up TeamViewer for remote technical support

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Quick Tip: Setting up TeamViewer for remote technical support

Post by martyscncgarage »

Once you download and install TeamViewer, follow this short video to setup a permanent password.
TeamViewer is used for remote PC access. Normally used for Support Staff to remote into your CNC PC to check your configuration if so requested.

https://youtu.be/bg4Sbxh3mso
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply