Started up CNC12 v5.06 like always but got a surprise, see pic.
Acknowledged the message and continued booting up CNC12, only to find that the WMPG interface was partly disabled. It could receive data but could not command router position. Powering down CNC12 and power it back on fixed the issue and the message has not appeared again. It seems like a bug to disable the WMPG in some way if the WMPG isn't powered up before CNC12. Anyone else have this happen?
Curious error msg for WMPG
Moderator: cnckeith
-
- Posts: 180
- Joined: Tue Jul 11, 2023 12:25 am
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: San Diego CA
Curious error msg for WMPG
Previous hobby, building hard core sports cars. See http://midlana.com/ and http://kimini.com/
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Curious error msg for WMPG
no bug. wmpg has been working well for years now.
its always a PC usb port issue. use a different port and reboot the PC
its always a PC usb port issue. use a different port and reboot the PC
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 346
- Joined: Thu Nov 23, 2017 1:39 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Curious error msg for WMPG
I had the same message two days ago. I did the usual of unplugging and plugging back in the USB antennae. That didn't fix it so I restarted CNC12 and then all was OK. It has not happened again. No updates of OS or any other software. The computer is not connected to the internet.
That is the first time that has happened to me in two years at least.
That is the first time that has happened to me in two years at least.
-
- Posts: 2234
- Joined: Fri May 24, 2019 8:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804734C6498-0401191832
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clearwater, FL
Re: Curious error msg for WMPG
The WMPG does not need to be powered up first before CNC12. I only power mine up when I need to use it after cnc12 is already running and I even turn it off and on during the day and it always connects. Check the USB port you have it plugged in to and/or try another port. It’s certainly not a bug.
-
- Posts: 2190
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: Curious error msg for WMPG
Make sure in the power settings that "USB Suspend" is disabled
-
- Posts: 180
- Joined: Tue Jul 11, 2023 12:25 am
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: San Diego CA
Re: Curious error msg for WMPG
I do the same, powering CNC12 up without the WMPG, and turning it on and off throughout the day as needed. Never been a problem until this last time.
Previous hobby, building hard core sports cars. See http://midlana.com/ and http://kimini.com/
-
- Posts: 2234
- Joined: Fri May 24, 2019 8:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804734C6498-0401191832
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clearwater, FL
Re: Curious error msg for WMPG
Check the USB ports parameters and settings like Gary mentioned. Is the computer connected to the internet? Have you recently done any Windows updates? Is this a PC or laptop?