Centroid V5.06 Lathe Graph not showing
Moderator: cnckeith
-
- Posts: 90
- Joined: Thu Sep 21, 2023 10:13 am
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: United Kingdom
Centroid V5.06 Lathe Graph not showing
Has anybody else had the problem with the lathe graph not showing the toolpaths?
- Attachments
-
- report_E0623470B40F-0819215108_2024-01-10_14-06-49.zip
- (855.05 KiB) Downloaded 9 times
-
- Posts: 7359
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Centroid V5.06 Lathe Graph not showing
(4) 01-10-2024 13:51:37 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:51:37 9042 Probe Cleared
(4) 01-10-2024 13:51:37 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:51:38 9042 Probe Cleared
(4) 01-10-2024 13:51:39 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:51:39 9042 Probe Cleared
(4) 01-10-2024 13:51:40 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:51:40 9042 Probe Cleared
(4) 01-10-2024 13:51:51 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:51:51 9042 Probe Cleared
(4) 01-10-2024 13:51:53 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:51:53 9042 Probe Cleared
(4) 01-10-2024 13:52:00 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:52:01 9042 Probe Cleared
(4) 01-10-2024 13:52:18 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:52:18 9042 Probe Cleared
(4) 01-10-2024 13:52:19 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:52:19 9042 Probe Cleared
(4) 01-10-2024 13:52:19 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:52:20 9042 Probe Cleared
(4) 01-10-2024 13:52:21 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:52:27 9042 Probe Cleared
(4) 01-10-2024 13:52:28 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:52:29 9042 Probe Cleared
(4) 01-10-2024 13:52:32 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:52:33 9042 Probe Cleared
(1) 01-10-2024 13:54:45 204 Exiting CNC...Normal Exit (66)
(1) 01-10-2024 13:55:05 199 CNC Started
(1) 01-10-2024 13:55:11 CNC12 Lathe v5.06
(4) 01-10-2024 13:55:11 9033 Reset Initiated, Press Reset to Clear
(4) 01-10-2024 13:55:14 4032 Reset Cleared
(1) 01-10-2024 13:58:37 204 Exiting CNC...Normal Exit (66)
(1) 01-10-2024 13:59:16 199 CNC Started
(1) 01-10-2024 13:59:22 CNC12 Lathe v5.06
(4) 01-10-2024 13:59:22 9033 Reset Initiated, Press Reset to Clear
(4) 01-10-2024 13:59:25 4032 Reset Cleared
(1) 01-10-2024 14:01:04 204 Exiting CNC...Normal Exit (66)
(1) 01-10-2024 14:01:28 199 CNC Started
(1) 01-10-2024 14:01:34 CNC12 Lathe v5.06
(4) 01-10-2024 14:01:34 9033 Reset Initiated, Press Reset to Clear
(4) 01-10-2024 14:01:37 4032 Reset Cleared
(1) 01-10-2024 14:06:49 Creating report...
(4) 01-10-2024 13:51:37 9042 Probe Cleared
(4) 01-10-2024 13:51:37 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:51:38 9042 Probe Cleared
(4) 01-10-2024 13:51:39 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:51:39 9042 Probe Cleared
(4) 01-10-2024 13:51:40 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:51:40 9042 Probe Cleared
(4) 01-10-2024 13:51:51 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:51:51 9042 Probe Cleared
(4) 01-10-2024 13:51:53 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:51:53 9042 Probe Cleared
(4) 01-10-2024 13:52:00 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:52:01 9042 Probe Cleared
(4) 01-10-2024 13:52:18 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:52:18 9042 Probe Cleared
(4) 01-10-2024 13:52:19 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:52:19 9042 Probe Cleared
(4) 01-10-2024 13:52:19 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:52:20 9042 Probe Cleared
(4) 01-10-2024 13:52:21 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:52:27 9042 Probe Cleared
(4) 01-10-2024 13:52:28 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:52:29 9042 Probe Cleared
(4) 01-10-2024 13:52:32 8040 WARNING: PROBE TRIPPED
(4) 01-10-2024 13:52:33 9042 Probe Cleared
(1) 01-10-2024 13:54:45 204 Exiting CNC...Normal Exit (66)
(1) 01-10-2024 13:55:05 199 CNC Started
(1) 01-10-2024 13:55:11 CNC12 Lathe v5.06
(4) 01-10-2024 13:55:11 9033 Reset Initiated, Press Reset to Clear
(4) 01-10-2024 13:55:14 4032 Reset Cleared
(1) 01-10-2024 13:58:37 204 Exiting CNC...Normal Exit (66)
(1) 01-10-2024 13:59:16 199 CNC Started
(1) 01-10-2024 13:59:22 CNC12 Lathe v5.06
(4) 01-10-2024 13:59:22 9033 Reset Initiated, Press Reset to Clear
(4) 01-10-2024 13:59:25 4032 Reset Cleared
(1) 01-10-2024 14:01:04 204 Exiting CNC...Normal Exit (66)
(1) 01-10-2024 14:01:28 199 CNC Started
(1) 01-10-2024 14:01:34 CNC12 Lathe v5.06
(4) 01-10-2024 14:01:34 9033 Reset Initiated, Press Reset to Clear
(4) 01-10-2024 14:01:37 4032 Reset Cleared
(1) 01-10-2024 14:06:49 Creating report...
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 90
- Joined: Thu Sep 21, 2023 10:13 am
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: United Kingdom
Re: Centroid V5.06 Lathe Graph not showing
So what have these results got to do with the Graph not showing the tool paths.
-
- Posts: 3106
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Centroid V5.06 Lathe Graph not showing
Axis movement is inhibited while the probe is tripped.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 203
- Joined: Wed Oct 11, 2017 12:20 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Centroid V5.06 Lathe Graph not showing
Funnily enough, I was doing a small job yesterday and checked the graph and it was not there - blank? But was working last time used....
-
- Posts: 90
- Joined: Thu Sep 21, 2023 10:13 am
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: United Kingdom
Re: Centroid V5.06 Lathe Graph not showing
The photo was taken when the lathe was turning the part. I updated the software from V5.06 to V5.08 Now the graph is working showing the toolpaths.
-
- Posts: 7359
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Centroid V5.06 Lathe Graph not showing
your error logs are telling you that CNC12 thinks there is a probe tripped. therefore the spindle won't turn on, therefore there is no movement, therefore there is no run time graph.
eliminate the probe input in the wizard or configure it correctly.
eliminate the probe input in the wizard or configure it correctly.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 90
- Joined: Thu Sep 21, 2023 10:13 am
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: United Kingdom
Re: Centroid V5.06 Lathe Graph not showing
Those probe tripped are from when i was setting up the tools with the probe. The graph photo was taken when the program was running. It was a bug in V5.06 It is working in V5.08
-
- Posts: 7359
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Centroid V5.06 Lathe Graph not showing
I'm not aware of a bug in 5.06 that does that.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html