Page 5 of 5
Re: My Bridgeport Series 1 CNC Conversion Using Centroid Acorn
Posted: Mon Dec 04, 2017 5:43 pm
by Reedfirst
cncman172 wrote: ↑Fri Dec 01, 2017 12:53 pm
Readfirst,
You are doing a very nice job on your conversion. Congrats.
Russ
Thanks for the compliment!
Re: My Bridgeport Series 1 CNC Conversion Using Centroid Acorn
Posted: Thu Aug 08, 2019 9:24 am
by Reedfirst
Just a little update to my Bridgeport CNC conversion.
I decided to use the spindle encoder solution that Tom came up with in this thread.
viewtopic.php?f=20&t=1944
Of all the encoder solutions I've seen for a Bridgeport conversion I've seen, this is the most elegant solutions I've ever seen..
Ordering the encoder and read head was pretty straight forward although you have to contact RLS through their website to order the magnetic ring with the index pulse.
Here is a picture of where I am at so far. The encoder mount was machined from Tom's model. Programmed in fusion360 and machined on my Acorn powered Bridgeport.
Just waiting on some aluminum round bar to machine the magnetic radial ring mount.
Re: My Bridgeport Series 1 CNC Conversion Using Centroid Acorn
Posted: Thu Aug 08, 2019 11:00 am
by martyscncgarage
Reedfirst wrote: ↑Thu Aug 08, 2019 9:24 am
Just a little update to my Bridgeport CNC conversion.
I decided to use the spindle encoder solution that Tom came up with in this thread.
viewtopic.php?f=20&t=1944
Of all the encoder solutions I've seen for a Bridgeport conversion I've seen, this is the most elegant solutions I've ever seen..
Ordering the encoder and read head was pretty straight forward although you have to contact RLS through their website to order the magnetic ring with the index pulse.
Here is a picture of where I am at so far. The encoder mount was machined from Tom's model. Programmed in fusion360 and machined on my Acorn powered Bridgeport.
Just waiting on some aluminum round bar to machine the magnetic radial ring mount.
20190729_151241.jpg
Good to hear you are getting along. Looking forward to more build pictures and a video of the machine running!
Re: My Bridgeport Series 1 CNC Conversion Using Centroid Acorn
Posted: Sat May 16, 2020 9:09 am
by slodat
Any updates on the spindle encoder?
Re: My Bridgeport Series 1 CNC Conversion Using Centroid Acorn
Posted: Tue Aug 18, 2020 12:56 pm
by Reedfirst
slodat wrote: ↑Sat May 16, 2020 9:09 am
Any updates on the spindle encoder?
Sorry for the late reply....
I am embarrassed to admit my rigid tapping project is still sitting here on my desk.
However I did manage to score an extra bearing retaining sleeve so I can machine it before taking my machine apart...
Re: My Bridgeport Series 1 CNC Conversion Using Centroid Acorn
Posted: Tue Aug 18, 2020 2:09 pm
by martyscncgarage
Cool!