Limit Switch Wiring
Moderator: cnckeith
-
Yarger897
- Posts: 10
- Joined: Mon Oct 02, 2023 6:10 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Limit Switch Wiring
So, I'm very green, this is my first machine. I am kind of lost when it comes to limit switch wiring. I have a total of 7 limit switch 3 for homing and 3 for over travel, the last one is for squaring the Y axis. From my understanding and I may be wrong, but I will need to have each set of limit switches on their own input. First 3 for Home All, second 3 for Limit All and third input for home slave. Then somehow, I need to add my estop in. If anyone could help lean me in the right direction, I would very much appreciate it. This is what I have come up with in Visio.
- Attachments
-
Last edited by Yarger897 on Fri Oct 20, 2023 7:35 pm, edited 1 time in total.
-
Yarger897
- Posts: 10
- Joined: Mon Oct 02, 2023 6:10 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Limit Switch Wiring
Thanks for the info. I think that I figured it out.