How to stop weekly report(kind of solved, but I would still like to stop weekly reports)
Moderator: cnckeith
-
- Posts: 353
- Joined: Wed Jan 23, 2019 4:19 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 80F5B5B92C3A-0213236854
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
How to stop weekly report(kind of solved, but I would still like to stop weekly reports)
Does anyone know how to stop the automatic weekly report acorn does?
It is overwriting my custom home file when it does this and I would just like to turn it off. This was not happening with 4.82 by the way. I have a saved copy of the report to reload in case of a crash and I don't want the report happening anyway.
Thanks
Ken
It is overwriting my custom home file when it does this and I would just like to turn it off. This was not happening with 4.82 by the way. I have a saved copy of the report to reload in case of a crash and I don't want the report happening anyway.
Thanks
Ken
Last edited by Ken Rychlik on Fri Aug 18, 2023 9:47 am, edited 1 time in total.
Ken
-
- Posts: 2199
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: How to stop weekly report
Do you have "Custom Homing File" checked in the Wizard?
-
- Posts: 353
- Joined: Wed Jan 23, 2019 4:19 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 80F5B5B92C3A-0213236854
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: How to stop weekly report
Yes I do, but I still don't understand how it can change anything without me running the wizard and asking for a change. I have it working fine and I don't want any automatic changes happening.Gary Campbell wrote: ↑Thu Aug 17, 2023 1:54 pm Do you have "Custom Homing File" checked in the Wizard?
I just want to turn off the automatic weekly thing so I don't have to worry about it.
Ken
Ken
-
- Posts: 2199
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: How to stop weekly report
There shouldn't be any changes happening during the weekly report writing. Are you sure that is what is causing the issue? With thousands of machines writing those weekly reports, this is the first I've heard of this issue
-
- Posts: 353
- Joined: Wed Jan 23, 2019 4:19 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 80F5B5B92C3A-0213236854
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: How to stop weekly report
It could be coincidence, but after the weekly report thing twice now my homing file was replaced by a canned version. I have them saved so I can drop it back in, but I have the machine for sale and this is a concern. I dug through all of the manuals and could not find a way to turn it off. When it ask for the manual squaring, I know it has been replaced again. I have another machine in the shop that I copied the report from to paste into this multicam and the other machine is doing fine. The one that is doing fine does not even have custom home file checked in the wizard and it does not do this.
I can go into the wizard and change rapid speeds without it changing the home file. Why the report changes is has me scratching my head as well.
I can go into the wizard and change rapid speeds without it changing the home file. Why the report changes is has me scratching my head as well.
Ken
-
- Posts: 2199
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: How to stop weekly report
Do both machines have exactly the same software versions?
-
- Posts: 353
- Joined: Wed Jan 23, 2019 4:19 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 80F5B5B92C3A-0213236854
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: How to stop weekly report
5.04 and yes. So why can one be different you ask? I don't have an answer for the argument. One had to be changed to axis paring, so they are quite a bit different in the end. I just used a report to get most of my macro's loaded quicker.
Ken
-
- Posts: 2199
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: How to stop weekly report
I didn't ask. I just wanted to make sure you weren't doing a restore from one version to another, which won't work.So why can one be different you ask?
-
- Posts: 353
- Joined: Wed Jan 23, 2019 4:19 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 80F5B5B92C3A-0213236854
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: How to stop weekly report
It was just a question that raised an obvious question to me. It didn't like doing a restore from one machine to another. Warnings about being on a different controller and it took a second try to get it in.
The report was on a board that was from 2019 and given to me. I am wondering if there is something different about a report from an older board.
The report was on a board that was from 2019 and given to me. I am wondering if there is something different about a report from an older board.
Ken
-
- Posts: 353
- Joined: Wed Jan 23, 2019 4:19 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 80F5B5B92C3A-0213236854
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: How to stop weekly report
More knowledge. Visiting with Scott on the beta side, I realized that my report saved did not save the custom homing file.
Ken