Hi,
I have a mill with brake on the z-axis, to release the brake I need to supply 24V.
I also have the power to all my axis servos for my mill on a contactor, to energize it I need to supply the contactor with 24V.
I have the brake on output 2 and the contactor on output 7.
Is there a way to have both outputs activated with the NoFaultOut command?
I know I can hardwire both together but I was wondering if there is a software way to do this. Thanks in advance!
Daniel
Controlling 2 outputs with one definition
Moderator: cnckeith
-
DanielCA92563
- Posts: 34
- Joined: Fri Oct 13, 2017 1:23 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: Controlling 2 outputs with one definition
Assign your emergency stop output, which allows power to the servos, as "NoFaultOut".
Assign your Z axis brake release output as "Axis3BrakeRelease".
Assign your Z axis brake release output as "Axis3BrakeRelease".