The video on the Acorn Plasma
Moderator: cnckeith
-
lilb93
- Posts: 153
- Joined: Mon Nov 06, 2017 10:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0216041209
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
The video on the Acorn Plasma
Watched the video yesterday on the acorn Plasma. Was really good. Just got in a Langmuir XR 4X8 table. Wondering how easy it would be to change it over to Acorn.
Barnesville, PA.
I always thought it would take longer to grow old.
I always thought it would take longer to grow old.
-
martyscncgarage
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: The video on the Acorn Plasma
Its doable.
Currently only Hypertherm Powermax plasma cutters are supported if you want to use torch height control.
If you don't you don't have to use it. In the future if you get a Hypertherm Powermax, then you could add the THC.
It would be up to you to add a breakaway and an OHMIC sensing tip or floating switch on the Z axis
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
lilb93
- Posts: 153
- Joined: Mon Nov 06, 2017 10:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0216041209
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: The video on the Acorn Plasma
Got the Langmuir XR in opened the control box looks to be a real easy changeover. Why only Hypertherm does the board know your using joe smuch plasma?
- Attachments
-
-
-
Barnesville, PA.
I always thought it would take longer to grow old.
I always thought it would take longer to grow old.
-
martyscncgarage
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: The video on the Acorn Plasma
It is the cleanliness of the torch voltage.
Hypetherm only to use the Centroid THC
Hypetherm only to use the Centroid THC
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
cnckeith
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: The video on the Acorn Plasma
we support Lincoln Flex Cut as well.martyscncgarage wrote: ↑Tue May 10, 2022 11:26 pm It is the cleanliness of the torch voltage.
Hypetherm only to use the Centroid THC
and trying to work with Thermal Dynamics unit now to add to the list.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html