Ok. I’ll give that a shot when I get back to my shop. Thank you!
Hsc86h Stepper driver (Resolved)
Moderator: cnckeith
-
- Posts: 23
- Joined: Fri Aug 21, 2020 11:00 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Hsc86h Stepper driver
Thanks for the help y’all. My problem can be traced back to my not understanding that the alarm on my driver is set to NO as opposed to NC. Also I didn’t know that in acorn you can change the input to detect either a NO or NC sensor.
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Hsc86h Stepper driver
So this issue can be called resolved?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 536
- Joined: Sat Jul 08, 2017 7:38 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: n/a yet
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Collierville, TN USA
Re: Hsc86h Stepper driver
Hiya jojo, I have a couple of these right angle style DB25 breakounts on my Acorn installs. I was very short on space as well. I got mine on Amazon in 2018 but they no longer have them and they are a little different (mine have no DIN rail mounts but mounts unscrew on the ones the I linked to.)HTH!
https://www.ebay.com/itm/DIN-Rail-Mount ... 1195.m1851
Last edited by DICKEYBIRD on Tue Aug 25, 2020 3:45 am, edited 1 time in total.
Milton in Collierville, TN
"Accuracy is the sum total of your compensating mistakes."
"Accuracy is the sum total of your compensating mistakes."
-
- Posts: 23
- Joined: Fri Aug 21, 2020 11:00 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Hsc86h Stepper driver
Yes it can! Thank you again!
-
- Posts: 23
- Joined: Fri Aug 21, 2020 11:00 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Hsc86h Stepper driver
Thank you!DICKEYBIRD wrote: ↑Tue Aug 25, 2020 3:43 amHiya jojo, I have a couple of these right angle style DB25 breakounts on my Acorn installs. I was very short on space as well. I got mine on Amazon in 2018 but they no longer have them and they are a little different (mine have no DIN rail mounts but mounts unscrew on the ones the I linked to.)HTH!
https://www.ebay.com/itm/DIN-Rail-Mount ... 1195.m1851