Hsc86h Stepper driver (Resolved)

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
jojo
Posts: 23
Joined: Fri Aug 21, 2020 11:00 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Hsc86h Stepper driver

Post by jojo »

swissi wrote: ↑Sun Aug 23, 2020 7:23 pm
jojo wrote: ↑Sun Aug 23, 2020 7:09 pm In the wizard I can drag and drop the inputs. They show up as green or red for NO and NC. But I don’t see how it lets me change the setting to one or the other. How do you change it in the wizard?
Just click the round icon with the Input number in it. When it's Green its NC and when it's Red it's NO. Clicking the icon will flip flop the status.

-swissi

Ok. I’ll give that a shot when I get back to my shop. Thank you!
Top
jojo
Posts: 23
Joined: Fri Aug 21, 2020 11:00 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Hsc86h Stepper driver

Post by jojo »

Thanks for the help y’all. My problem can be traced back to my not understanding that the alarm on my driver is set to NO as opposed to NC. Also I didn’t know that in acorn you can change the input to detect either a NO or NC sensor.
Top
martyscncgarage
Posts: 9914
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Hsc86h Stepper driver

Post by martyscncgarage »

jojo wrote: ↑Mon Aug 24, 2020 8:03 am Thanks for the help y’all. My problem can be traced back to my not understanding that the alarm on my driver is set to NO as opposed to NC. Also I didn’t know that in acorn you can change the input to detect either a NO or NC sensor.
So this issue can be called resolved?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Top
DICKEYBIRD
Posts: 536
Joined: Sat Jul 08, 2017 7:38 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: n/a yet
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Collierville, TN USA

Re: Hsc86h Stepper driver

Post by DICKEYBIRD »

jojo wrote: ↑Sat Aug 22, 2020 11:34 amI have the db25 breakout board on standby but haven’t tried it yet since I’m short on space.
Hiya jojo, I have a couple of these right angle style DB25 breakounts on my Acorn installs. I was very short on space as well. I got mine on Amazon in 2018 but they no longer have them and they are a little different (mine have no DIN rail mounts but mounts unscrew on the ones the I linked to.)HTH!

https://www.ebay.com/itm/DIN-Rail-Mount ... 1195.m1851
Last edited by DICKEYBIRD on Tue Aug 25, 2020 3:45 am, edited 1 time in total.
Milton in Collierville, TN

"Accuracy is the sum total of your compensating mistakes."
Top
jojo
Posts: 23
Joined: Fri Aug 21, 2020 11:00 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Hsc86h Stepper driver

Post by jojo »

martyscncgarage wrote: ↑Mon Aug 24, 2020 3:38 pm
jojo wrote: ↑Mon Aug 24, 2020 8:03 am Thanks for the help y’all. My problem can be traced back to my not understanding that the alarm on my driver is set to NO as opposed to NC. Also I didn’t know that in acorn you can change the input to detect either a NO or NC sensor.
So this issue can be called resolved?
Yes it can! Thank you again! :)
Top
jojo
Posts: 23
Joined: Fri Aug 21, 2020 11:00 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Hsc86h Stepper driver

Post by jojo »

DICKEYBIRD wrote: ↑Tue Aug 25, 2020 3:43 am
jojo wrote: ↑Sat Aug 22, 2020 11:34 amI have the db25 breakout board on standby but haven’t tried it yet since I’m short on space.
Hiya jojo, I have a couple of these right angle style DB25 breakounts on my Acorn installs. I was very short on space as well. I got mine on Amazon in 2018 but they no longer have them and they are a little different (mine have no DIN rail mounts but mounts unscrew on the ones the I linked to.)HTH!

https://www.ebay.com/itm/DIN-Rail-Mount ... 1195.m1851
Thank you!
Top
Post Reply

Return to “Centroid Acorn CNC Controller”