Hello All,
Will an Acorn work with the Sherline Chucker's Optical Encoder?
Regards,
Art
Sherline encoder
Moderator: cnckeith
-
- Posts: 3122
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Sherline encoder
Manufacturer/part number for the encoder and we can give you some help. If it's an RS422 differential quadrature encoder of at least 1000 lines, it should work fine.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Sherline encoder
As Tom mentioned, it must be a standard line driver differential encoder to be compatible with Acorn.
They can be fairly inexpensive. Need information on your encoder, make/model number/cut sheet. PIcture of it on your machine would be helpful and how it is interfaced with the lathe spindle.
Marty
They can be fairly inexpensive. Need information on your encoder, make/model number/cut sheet. PIcture of it on your machine would be helpful and how it is interfaced with the lathe spindle.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 536
- Joined: Sat Jul 08, 2017 7:38 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: n/a yet
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Collierville, TN USA
Re: Sherline encoder
Doesn't Franco have a Sherline chucker/Acorn lathe. He could tell you what he did.
Milton in Collierville, TN
"Accuracy is the sum total of your compensating mistakes."
"Accuracy is the sum total of your compensating mistakes."