Acorn Controller and Foam cutting
Moderator: cnckeith
-
- Posts: 52
- Joined: Wed Nov 23, 2011 11:04 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: K2019,K1110
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: Yes
- Location: Finger Lakes, NY
Re: Acorn Controller and Foam cutting
The manual in installed in the demo mode Hit F5 then F3 the manual comes up
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Acorn Controller and Foam cutting
Joe, please read the CNC12 4.14 Mill Operator's manual AND since we don't have an ACORN Installation manual (yet, being worked on)
You might want to look at the All in One DC Installation manual as a reference each axis CAN be made to be linear or rotary.
https://www.centroidcnc.com/centroid_di ... nuals.html
You might want to look at the All in One DC Installation manual as a reference each axis CAN be made to be linear or rotary.
https://www.centroidcnc.com/centroid_di ... nuals.html
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ