V4.14 and DYN4 - MUST SET DB25 SECTION TO SCREW TERMINALS!
Moderator: cnckeith
-
- Posts: 19
- Joined: Sun Feb 11, 2018 1:39 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
V4.14 and DYN4 - MUST SET DB25 SECTION TO SCREW TERMINALS!
When upgrading to v4.14 and using DYN4 servo drives, you must select "Set to screw terminals" under the DB25 tab or your servo "enable" signals won't work and your step direction will be reversed.
-
- Posts: 66
- Joined: Fri Aug 17, 2018 11:04 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38d2693c4f62-0725181074
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: V4.14 and DYN4 - MUST SET DB25 SECTION TO SCREW TERMINALS!
yup that got me lol!
-
- Posts: 2190
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: V4.14 and DYN4 - MUST SET DB25 SECTION TO SCREW TERMINALS!
So... has anyone found that there are around a hundred "fill in boxes" in the wizard and ALL of them mean something?
-
- Posts: 793
- Joined: Thu Apr 12, 2018 11:16 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: V4.14 and DYN4 - MUST SET DB25 SECTION TO SCREW TERMINALS!
There’s a lot of auto-magical in the background that isn’t explained or documented. For example using db25 step and direction and you must choose screw terminals so the enable outputs work.
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: V4.14 and DYN4 - MUST SET DB25 SECTION TO SCREW TERMINALS!
Centroid ran out of time to separate DYN2 and DYN4 in 4.14.
Next revision will have a separate radio button for DYN2 AND DYN4 (provided you use the screw terminals)
Marty
Next revision will have a separate radio button for DYN2 AND DYN4 (provided you use the screw terminals)
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ