Millright 2000

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
lilb93
Posts: 153
Joined: Mon Nov 06, 2017 10:26 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0216041209
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact lilb93

Millright 2000

Post by lilb93 »

Found my old CD with Millright 2000 from Centroid. Can you use this with the Acorn to do engraving.
Barnesville, PA.

I always thought it would take longer to grow old.
Top
cnc_smith
Posts: 238
Joined: Mon Nov 20, 2017 10:13 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: Yes
Location: Frenchville, PA

Re: Millright 2000

Post by cnc_smith »

lilb93 wrote: ↑Fri Oct 19, 2018 12:01 pm Found my old CD with Millright 2000 from Centroid. Can you use this with the Acorn to do engraving.
Yes, You may have to make minor adjustment for the post. Not because of Acorn, just the way the Millwrite basic post is.
Dana

When requesting support, please ALWAYS post a current report.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Top
Post Reply

Return to “Centroid Acorn CNC Controller”