New Centroid Acorn Control 3D Printed Case!
Moderator: cnckeith
-
- Posts: 19
- Joined: Thu Jan 11, 2018 12:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
New Centroid Acorn Control 3D Printed Case!
New downloadable case for Centroid Acorn. Link to download the case: https://www.thingiverse.com/thing:2872967
Miguel G. and I collaborated to make a 3D printed case for my version 3(Acorn 171025) Centroid Acorn. This case is compatible with Acorn 171025 and later. It's made in fusion 360. I've uploaded to my thingiverse the .f3d, .step and .stl file so you can change and adapt it to fit your needs!
https://youtu.be/WaK6ZS0Xnnw
Miguel G. and I collaborated to make a 3D printed case for my version 3(Acorn 171025) Centroid Acorn. This case is compatible with Acorn 171025 and later. It's made in fusion 360. I've uploaded to my thingiverse the .f3d, .step and .stl file so you can change and adapt it to fit your needs!
https://youtu.be/WaK6ZS0Xnnw
-
- Posts: 224
- Joined: Thu Feb 22, 2018 1:21 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: C8FD19F23AFF-0213180659
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Augusta, Ga
Re: New Centroid Acorn Control 3D Printed Case!
Nicely done!
-
- Posts: 654
- Joined: Sat Sep 23, 2017 7:57 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Honolulu, HI
Re: New Centroid Acorn Control 3D Printed Case!
Yes, very nice! Too bad it will be virtually impossible to produce on your typical fdm printer.
-
- Posts: 39
- Joined: Sat Oct 14, 2017 2:10 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: many boards
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Denmark
Re: New Centroid Acorn Control 3D Printed Case!
Hi,
Don't pack the Acorn board in a too close case without proper cooling,
It will burn off !!
\PLData
Don't pack the Acorn board in a too close case without proper cooling,
It will burn off !!
\PLData
-
- Posts: 54
- Joined: Thu Feb 08, 2018 5:21 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Re: New Centroid Acorn Control 3D Printed Case!
i printed one on my fdm printer. turned out pretty decent. i can post pics and info if anyone would like
Jeremy
Pittsburgh, PA
Pittsburgh, PA
-
- Posts: 654
- Joined: Sat Sep 23, 2017 7:57 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Honolulu, HI
Re: New Centroid Acorn Control 3D Printed Case!
Well, your printer is better than mine. No discredit to Mary, but I wouldn't even attempt to print that...I am no expert but already know it will take a long time with tons of support necessary, and look really bad in the end.
-
- Posts: 54
- Joined: Thu Dec 14, 2017 8:18 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: 0503160222
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: SoCal
- Contact:
Re: New Centroid Acorn Control 3D Printed Case!
I printed one of these cases in FDM and noticed a few little issues that I corrected for my build. I emailed Mary and I will upload my STL files on Thingiverse if anyone else wants to use them.
In FDM:
https://photos.app.goo.gl/dkVTaf3FKNdR2Ovh1
In SLS and painted:
More photos can be found here:
https://photos.app.goo.gl/uFbljf4zD1aYBVn72
https://photos.app.goo.gl/SJSwZN46vTZEPqoh1
Thanks for all the hard work putting the 3d models together!
Bill
In FDM:
https://photos.app.goo.gl/dkVTaf3FKNdR2Ovh1
In SLS and painted:
More photos can be found here:
https://photos.app.goo.gl/uFbljf4zD1aYBVn72
https://photos.app.goo.gl/SJSwZN46vTZEPqoh1
Thanks for all the hard work putting the 3d models together!
Bill
-
- Posts: 668
- Joined: Fri Nov 30, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Thorp WI
Re: New Centroid Acorn Control 3D Printed Case!
Bill,
Did you ever upload your files to Thingiverse? I printed the base, but found that the standoffs are to low. How did the holes for releasing the catches work out?
I'd like to make it with a flat top so that I could do a color change for the logo.
Thanks,
Scott
Did you ever upload your files to Thingiverse? I printed the base, but found that the standoffs are to low. How did the holes for releasing the catches work out?
I'd like to make it with a flat top so that I could do a color change for the logo.
Thanks,
Scott
Scott
-
- Posts: 254
- Joined: Thu Nov 02, 2017 4:07 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 985DAD429EE9-0926170118
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Westerville, Ohio
Re: New Centroid Acorn Control 3D Printed Case!
Mary,
Ignore all the negative comments, I think you did a great job. As long as there is a little clearance in that case it should work perfect. You can touch y our Acorn after being on days and it is barely warm.
You made me put a 3D printer on the top of my toy list. ha ha
Russ
Ignore all the negative comments, I think you did a great job. As long as there is a little clearance in that case it should work perfect. You can touch y our Acorn after being on days and it is barely warm.
You made me put a 3D printer on the top of my toy list. ha ha
Russ