Setting max driver frequency

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
mikes
Posts: 94
Joined: Thu Jan 04, 2018 3:09 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: New Albany, OH

Setting max driver frequency

Post by mikes »

I understand that the Acorn is capable of driving steps at 400KHz. My Drivers are only capable of 200KHz. Is there a max frequency setting for each of the four driver output?
Gary Campbell
Posts: 2164
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Marquette, MI
Contact:

Re: Setting max driver frequency

Post by Gary Campbell »

Yes, you can set to 200 kps
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
diycncscott

Re: Setting max driver frequency

Post by diycncscott »

The default setting is 200khz
Post Reply