KL-5056 Step Driver power supply.
Moderator: cnckeith
-
- Posts: 35
- Joined: Mon Jan 15, 2018 8:11 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38D2693E0DE6-0117180536
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
KL-5056 Step Driver power supply.
So I understand that the KL-5056 step driver also needs a 5 volt power supply. I am a newbie so this was not obvious when I bought them. Can I use a power supply from a computer since they have a 5 volt output?
-
- Posts: 2189
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: KL-5056 Step Driver power supply.
If I read the manual on that drive correctly, you might be better off taking signal from the DB25 connector.
-
- Posts: 35
- Joined: Mon Jan 15, 2018 8:11 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38D2693E0DE6-0117180536
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: KL-5056 Step Driver power supply.
But the KL 5056 does not have a DB25 connector. I am new to this and building my first machine so please excuse my ignorance.
-
- Posts: 2189
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: KL-5056 Step Driver power supply.
Look this over: viewtopic.php?f=60&t=1527
-
- Posts: 35
- Joined: Mon Jan 15, 2018 8:11 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38D2693E0DE6-0117180536
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: KL-5056 Step Driver power supply.
Looks like a good solution, got my DB25 breakout board on the way.