im wondering what all i need hook these up. i am doing a cnc conversion on a lathe. im guessing i need to follow the gecko 203v diagram but i am not sure what resistors i will need or what?
acorn board and DQ542MA drivers
Moderator: cnckeith
-
- Posts: 54
- Joined: Thu Feb 08, 2018 5:21 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Contact:
acorn board and DQ542MA drivers
Jeremy
Pittsburgh, PA
Pittsburgh, PA
-
- Posts: 2181
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Marquette, MI
- Contact:
Re: acorn board and DQ542MA drivers
That drive appears to want sinking signals. I suggest the Leadshine Schematic for dual voltage power supply using 5vdc for the drive signals
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: acorn board and DQ542MA drivers
Agreed. Leadshine schematic.Gary Campbell wrote: ↑Wed Feb 14, 2018 9:12 pm That drive appears to want sinking signals. I suggest the Leadshine Schematic for dual voltage power supply using 5vdc for the drive signals
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 54
- Joined: Thu Feb 08, 2018 5:21 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Re: acorn board and DQ542MA drivers
thank you guys for your help!!! Much appreciated
Jeremy
Pittsburgh, PA
Pittsburgh, PA