Router Axis pairing problem

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
transmon
Posts: 14
Joined: Sat Jan 13, 2018 10:24 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: B0D5CC470A8C-1206170339

Router Axis pairing problem

Post by transmon » Sat Feb 03, 2018 12:41 pm

Hi guys got new Acorn board to replace bad one copied all my settings with snippet and made copy and renamed file cncm file did uninstall and reinstall CNC12. Now when I run my router the paired axis works for a few times then stops working , shut down CNC12 start wizard go to the advanced axis tab and the radio button is now saying NO ?? Why did it change itself its like it reverted to the default setting . I have tried rebooting computer and power cycle Acorn anybody have any thoughts Thanks All !!!

cnckeith
Posts: 605
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none
Contact:

Re: Router Axis pairing problem

Post by cnckeith » Sat Feb 03, 2018 1:48 pm

Please...post a report. it's most likely because you do not have the pro license installed.

transmon
Posts: 14
Joined: Sat Jan 13, 2018 10:24 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: B0D5CC470A8C-1206170339

Re: Router Axis pairing problem

Post by transmon » Sat Feb 03, 2018 3:54 pm

Thanks Keith tried that my soft limits are staying now but my Paired axis will work fine until I run program or home the machine after the right motor stops working exit go back into wizard and check axis pairing and it is off again also on the paired axis should axis four in custom axis config steps and turns ratio match the Y axis that it is paired off of ? if I change them to mach they will revert back to 200 stepps and 5 turns this is a belt drive router they is no reduction so turns should be 1 right ? Also did full unistall of CNC12 and reinstaled software. Thanks A bunch f or all you do for us DIYer's also is there someone who I can send my first Acorn board to that can check it to see what happened to it ? Thanks Dave
report_C8FD19F23147-0122180580_2018-02-03_14-40-40.zip
report1
(171.85 KiB) Downloaded 4 times

transmon
Posts: 14
Joined: Sat Jan 13, 2018 10:24 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: B0D5CC470A8C-1206170339

Re: Router Axis pairing problem

Post by transmon » Sat Feb 03, 2018 9:35 pm

I think I found the problem but not sure how to fix it ? this is not my original Acorn controller for this system the first one went bad so ordered new one now what i noticed is that it says it accepts the license for Pro in fact it does not it still says FREE not PRO, any way I did several uninstalls and deleted all the data for CNC12 but there is something I am missing just don't know what Thanks Dave

Gary Campbell
Posts: 167
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: C8FD19D3C3E1-1109170238
Location: Marquette, MI

Re: Router Axis pairing problem

Post by Gary Campbell » Sat Feb 03, 2018 10:52 pm

You will need Pro license that matches the serial number of your Acorn
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos

cnckeith
Posts: 605
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none
Contact:

Re: Router Axis pairing problem

Post by cnckeith » Sun Feb 04, 2018 2:02 am

email the report to diysales@centroidcnc.com and the crew will email you the proper Pro license

Post Reply

Who is online

Users browsing this forum: andyolney and 2 guests