Centroid Lathe Intercon Conversational part programming software

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
tblough
Posts: 3071
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Centroid Lathe Intercon Conversational part programming software

Post by tblough »

Just a quick additional comment on Keith's video (the topic is locked or I would have added this there). On any of the Intercon cycles, press F5 to bring up the graphical help. When you scroll through the inputs on the right side of the screen, the cut parameter being altered will highlight on the left side graphic.
InterconHelp.png
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Post Reply