Eithernet cable

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Posts: 3
Joined: Mon Nov 13, 2017 3:59 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: none

Eithernet cable

Post by dhspring » Thu Jan 25, 2018 3:13 pm

What are the cat ends that plug into the all in one board and the other parts for the shielded eithernet cable?

Posts: 281
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none

Re: Eithernet cable

Post by Centroid_Liviu » Thu Jan 25, 2018 5:24 pm

It is a RJ-45 Shielded CAT5E cable and jack. Are you trying to make your own? We sell Ethernet Cable in various lenghts, you can also source it all over the internet, as long as its Shielded CAT5E or above it should work.

If you are looking to build your own I have attached a Technical Bulletin with the full details.
TB251 Ethernet Cable for Centroid Systems
(68.56 KiB) Downloaded 7 times

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests