Estun servo shuts off when acorn attempts to jog axis <<Resolved>>..

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

martyscncgarage
Posts: 953
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none
Location: Mesa, AZ

Re: Estun servo shuts off when acorn attempts to jog axis.

Post by martyscncgarage » Mon Feb 05, 2018 3:17 pm

amtekinc wrote:
Mon Feb 05, 2018 2:23 pm
IMG_0193.JPGIMG_0197.JPGIMG_0198.JPGIMG_0199.JPG

These are the pictures of the router and the project. For some reason, they did not attach to last post.
Did you click on attachements and select the files from your PC?
"Jack of all trades, master of none!"
Mesa, AZ

amtekinc
Posts: 8
Joined: Thu Jan 25, 2018 10:19 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none

Re: Estun servo shuts off when acorn attempts to jog axis.

Post by amtekinc » Mon Feb 05, 2018 4:07 pm

I did and tried it several times. I can see them on preview, but, after posting they cannot be seen.

amtekinc
Posts: 8
Joined: Thu Jan 25, 2018 10:19 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none

Re: Estun servo shuts off when acorn attempts to jog axis.

Post by amtekinc » Mon Feb 05, 2018 4:58 pm

Well. Apparently Centroid can't tell me why the attachment does not work for pictures. So I have to link to Google Photo Album. I HATE GOOGLE.

https://photos.google.com/u/0/album/AF1 ... R_YaJfAz1Y

Centroid_Liviu
Posts: 281
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none

Re: Estun servo shuts off when acorn attempts to jog axis.

Post by Centroid_Liviu » Mon Feb 05, 2018 5:37 pm

download.formscentral.acrocomcontent.com.jpg
I am not sure why it is not working for you. I just did "Add Files" and then "Place inline". There is a file size limit of 3MB I think though.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest