Part Zeros & Tool Changes w/ Acorn CNC: X and Y by Jogging
In this video I show how to set part zeros for the X and Y axes as well as a tool change using the Centroid Acorn CNC control system and CNC12 Mill software.
https://youtu.be/zRfziOWJQ20
Mary's MakeShop DIY CNC Video Channel
Moderator: cnckeith
-
- Posts: 19
- Joined: Thu Jan 11, 2018 12:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
-
- Posts: 19
- Joined: Thu Jan 11, 2018 12:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: Mary's MakeShop DIY CNC Video Channel
Part Zeros & Tool Changes w/ Acorn CNC: Zeroing Z using a Tool Touch Off and Macro
In this video I show how to set part zeros for the Z axis using a tool touch off and how to install the macro for the tool touch off using CNC12 Mill software.
https://youtu.be/zQWr352fS7c
In this video I show how to set part zeros for the Z axis using a tool touch off and how to install the macro for the tool touch off using CNC12 Mill software.
https://youtu.be/zQWr352fS7c