Stepper Motor Not Working
Moderator: cnckeith
-
- Posts: 14
- Joined: Tue Jan 23, 2018 10:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: "38D2693E3856-0111180526"
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Stepper Motor Not Working
I'm not exactly sure to be honest with you but I bought them on eBay a while back. I went on Google and compared mine to similar photos and found they were similar, so am assuming that they are comparable.
-
- Posts: 14
- Joined: Tue Jan 23, 2018 10:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: "38D2693E3856-0111180526"
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Stepper Motor Not Working
Good news. I finally figured out how to set up the Wizard settings and now have the stepper motor working. Took a lot of trial and error as well as some help from the forum but it all came together. Thanks for your help.
-
- Posts: 14
- Joined: Tue Jan 23, 2018 10:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: "38D2693E3856-0111180526"
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Stepper Motor Not Working
I had the fast jog set too high in the Axis Configuration in Wizard. It was originally set at 50 and I dropped it down to 25 and also had to set the Maximum Rate to match the Fast Jog rate. This seemed to make the difference in getting the motors turning.
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Stepper Motor Not Working
Thanks for getting back with us
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ