325 Limit Error? <resolved>

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
centroidsupport
Posts: 120
Joined: Tue Sep 28, 2021 6:26 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: 325 Limit Error?

Post by centroidsupport »

Rick,

What turned out to be the resolution to your limit error?
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
https://www.centroidcnc.com/centroid_di ... _gear.html
Top
ShawnM
Posts: 2234
Joined: Fri May 24, 2019 8:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 7804734C6498-0401191832
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Clearwater, FL

Re: 325 Limit Error?

Post by ShawnM »

RGSparber wrote: ↑Mon Dec 27, 2021 4:42 pm I ran error free for 1.5 hours so am now confident in saying that my noise problem has been solved.

Thanks to all!

Rick
Great but please check your error log and verify no more pc/mpu resends. If you see any you are not out of the woods yet. :D
Top
RGSparber
Posts: 150
Joined: Sat May 27, 2017 2:12 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 38D269533454-0111180523
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Phoenix, AZ
Contact:
Contact RGSparber

Re: 325 Limit Error?

Post by RGSparber »

All I see is probe activity from setting up Part 0.

Rick
Attachments
report_38D269533454-0111180523_2021-12-29_06-45-00.zip
(654.74 KiB) Downloaded 57 times
Top
RGSparber
Posts: 150
Joined: Sat May 27, 2017 2:12 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 38D269533454-0111180523
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Phoenix, AZ
Contact:
Contact RGSparber

Re: 325 Limit Error?

Post by RGSparber »

centroidsupport wrote: ↑Wed Dec 29, 2021 9:05 am Rick,

What turned out to be the resolution to your limit error?
My screw compensation table went out to an X value of 13 but, a few days ago, changed my soft limit to 12 when I removed my limit micro switch. By changing the soft limit to 13, it appears to be happy.

Rick
Top
Post Reply

Return to “Centroid Acorn CNC Controller”