Wiring Schematic for Leadshine MA860H

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Krenovian
Posts: 43
Joined: Thu Dec 21, 2017 12:50 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Wiring Schematic for Leadshine MA860H

Post by Krenovian »

I'm making the wiring connections to my new Acorn board. I have three older Leadshine MA860H drives. They are analog and so I assume not part of the Leadshine DM series of drives. Can anyone tell me if the Leadshine DM series schematic also works for these older drives or do I need to wire them to the board using a different schematic?

CJ
diycncscott

Re: Wiring Schematic for Leadshine MA860H

Post by diycncscott »

You can use our standard Leadshine schematic for the MA860H
Krenovian
Posts: 43
Joined: Thu Dec 21, 2017 12:50 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: Wiring Schematic for Leadshine MA860H

Post by Krenovian »

Thanks!

CJ
Post Reply