Start program at line number <answered>

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
dbunyip
Posts: 9
Joined: Sun Nov 12, 2017 12:08 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none

Start program at line number <answered>

Post by dbunyip » Thu Jan 04, 2018 1:58 am

Is there a way to start a program at a certain line number?

bloomingtonmike
Posts: 91
Joined: Wed Sep 11, 2013 1:31 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: 0916130849

Re: Start program at line number

Post by bloomingtonmike » Thu Jan 04, 2018 2:55 am

F4 run, f2 search, enter line number, cycle start.
Mikie in Bloomington IL

martyscncgarage
Posts: 954
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none
Location: Mesa, AZ

Re: Start program at line number

Post by martyscncgarage » Thu Jan 04, 2018 8:29 am

bloomingtonmike wrote:
Thu Jan 04, 2018 2:55 am
F4 run, f2 search, enter line number, cycle start.
You can also search for TOOL number and start from there as well.
The feature works well...
Marty
"Jack of all trades, master of none!"
Mesa, AZ

Post Reply

Who is online

Users browsing this forum: Charlie.G, diycncscott, lilb93 and 1 guest