Hi,
Is there a dimensional drawing of the Acorn board ?
Cheers,
Jake
Dimensional drawing of the Acorn Board
Moderator: cnckeith
-
DICKEYBIRD
- Posts: 536
- Joined: Sat Jul 08, 2017 7:38 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: n/a yet
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Collierville, TN USA
Re: Dimensional drawing of the Acorn Board
Yup, go here: http://www.centroidcnc.com/centroid_diy ... oller.html and click on the controller spec. manual. Let me be the first to welcome you aboard & remind you to RTFM. 
Just KIDDING!
Just KIDDING!Milton in Collierville, TN
"Accuracy is the sum total of your compensating mistakes."
"Accuracy is the sum total of your compensating mistakes."
-
cut2cut
- Posts: 74
- Joined: Sat Dec 23, 2017 3:02 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38D26950ABAB-1221170383
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Dimensional drawing of the Acorn Board
Haha! My card shows up tomorrow. I figured i’d have a bit of leeway until then. But nope ! Lol
Thank you !
Jake
Thank you !
Jake
-
frijoli
- Posts: 595
- Joined: Tue Sep 12, 2017 10:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 1030090099
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Outside Winston-Salem, NC
- Contact:
Re: Dimensional drawing of the Acorn Board
There's a couple 3D models as well.
Clay
Clay
Clay
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/