Page 1 of 1
Acorn 3d model
Posted: Sat Dec 16, 2017 9:48 pm
by frijoli
Mostly to scale. All mounting holes are accurate.
Terminal location are are spaced proper distance apart, however they are probably only within .02" as they are measured from the board.
I had to use a USB connector instead of an Ethernet, but you know what it is.
Clay
Re: Acorn 3d model
Posted: Fri Jan 26, 2018 12:18 am
by francoCNC
Nice. Fusion360? Are you sharing the file? If so, I know a few guys (myself included) that would like that.
-Franco
Re: Acorn 3d model
Posted: Fri Jan 26, 2018 6:18 am
by frijoli
francoCNC wrote: ↑Fri Jan 26, 2018 12:18 am
Nice. Fusion360? Are you sharing the file? If so, I know a few guys (myself included) that would like that.
-Franco
Yes Fusion 360.
There are two versions out there. Mine isn't perfect, but I can share it. The terminals are in the correct location, mounting is correct, but the Ethernet port is not an ethernet port, but USB.
I am traveling today, so it will be tomorrow before I can do it.
Clay
Re: Acorn 3d model
Posted: Sat Jan 27, 2018 4:37 pm
by frijoli
francoCNC wrote: ↑Fri Jan 26, 2018 12:18 am
Nice. Fusion360? Are you sharing the file? If so, I know a few guys (myself included) that would like that.
-Franco
See if this works. Never shared from Fusion before.
http://a360.co/2DDv3KD
Re: Acorn 3d model
Posted: Tue Mar 20, 2018 1:55 pm
by MarysMakeShop
Hey guys. I was interested in 3D printing a case for my Acorn so I made a 3D model of version 3(Acorn 171025). Pictures are below here is the link to download the file in the extension of your choice:
https://a360.co/2pBMQMq
The difference between board versions, at least physically, seems to be the terminal strips(they protrude more). Mine isn't as pretty as frijoli's(AcornBoardV2), but the file is 10x less memory and I was able to design an enclosure without any loading problems. Sometime my PC struggles if the board has too much detail. Anyway, thought I would share it in case it would help someone. It was made in Fusion 360 and I designed a 3D printed case around it and it fit(3D printer resolution= 150 microns). I'll be uploading the video and files to my 3D printed case soon!
Update 3/24/18 : I updated the 3D model to adjust the mounting holes and DB 9 location, had to clean it up a bit. Link is the updated version! Stay safe out there!
Re: Acorn 3d model
Posted: Wed Mar 21, 2018 1:21 am
by dudeTheory
lol it looks like everyone is doing the same thing.
here's pic of the one i made, mounting points were accurate enough to make a case.
I 3d printed a prototype case, I'll be making a final version out of acrylic.
Re: Acorn 3d model
Posted: Wed Mar 21, 2018 4:45 pm
by PLData
Hi,
Fine work, but be careful not to close the acorn card in so it can not get it cooling and burm off !!
\PLData
Re: Acorn 3d model
Posted: Sat May 05, 2018 6:36 pm
by MarysMakeShop
New downloadable case for Centroid Acorn. Link to download the case:
https://www.thingiverse.com/thing:2872967
Miguel G. and I collaborated to make a 3D printed case for my version 3(Acorn 171025) Centroid Acorn. This case is compatible with Acorn 171025 and later. It's made in fusion 360. I've uploaded to my thingiverse the .f3d, .step and .stl file so you can change and adapt it to fit your needs!
https://youtu.be/WaK6ZS0Xnnw