Phoenix Bulkhead Connectors

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Gary Campbell
Posts: 2164
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Marquette, MI
Contact:

Phoenix Bulkhead Connectors

Post by Gary Campbell »

As requested from another thread. Phoenix COMBICON DFK-MSTB series connectors. I purchase them from Digikey, but they should be handled by your favorite electro-supplier. To see the whole line, I enter the series name in the search bar (in red) and in most cases the complete line is returned.

These are 10A panel mount connectors and plugs. Plugs have screw fasteners into the blocks. The blocks have solder terminals to the rear, the plugs have screw terminals for connecting wires. There are higher wattage versions (some with rear screw terminals) if needed. Here are the Digikey part numbers I use:
Phoenix Conn.JPG
Here is the catalog page showing the panel mount terminal block:
Phoenix Term.JPG
Here is what they look like on the panel I make:
DSC00305.JPG
And a view from the back:
DSC00297.JPG
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Phoenix Bulkhead Connectors

Post by martyscncgarage »

Thanks Gary!
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply