computer selection

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

martyscncgarage
Posts: 722
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none
Location: Mesa, AZ

Re: computer selection

Post by martyscncgarage » Sun Dec 03, 2017 3:05 pm

I have found that any Intel processor running at 2.9ghz or faster works. That includes Pentium, Celeron, i3, i5.
They all meet the minimum benchmark. SSD's can be had for well under $100 and highly recommended.
My .02 :)
Marty
"Jack of all trades, master of none!"
Mesa, AZ

cnckeith
Posts: 515
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none
Contact:

Re: computer selection

Post by cnckeith » Sun Dec 03, 2017 9:55 pm

think this guy is wearing depends?
24273650_1515663598469406_7348917322273007754_o.jpg

martyscncgarage
Posts: 722
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none
Location: Mesa, AZ

Re: computer selection

Post by martyscncgarage » Sun Dec 03, 2017 10:14 pm

Naw, he's gotta Centroid running his machine. 😁
"Jack of all trades, master of none!"
Mesa, AZ

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests