Page 1 of 1

Quencharc

Posted: Sun Dec 03, 2017 3:28 am
by dbunyip
Does anyone have pictures of how the Quencharc are supposed to be installed. The TB206.pdf document only shows 1 of the pictures for me. Does it only take 1 across the 2 coil terminals or does it go across the 2 power lines as well on the contactor?

Re: Quencharc

Posted: Sun Dec 03, 2017 9:11 am
by cnckeith
Snubbers (quencharc) are installed Across coils
from the Acorn Schematics Library, schematic #S14826 download here. http://www.centroidcnc.com/centroid_diy ... matics.zip

snubber_1600.jpg
acorn snubberJPG.JPG

Re: Quencharc

Posted: Sun Dec 03, 2017 7:12 pm
by dbunyip
On 220v they go across L2 and L2 at the motor?

Re: Quencharc

Posted: Sun Dec 03, 2017 7:24 pm
by cnckeith