Quencharc

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
dbunyip
Posts: 9
Joined: Sun Nov 12, 2017 12:08 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none

Quencharc

Post by dbunyip » Sun Dec 03, 2017 3:28 am

Does anyone have pictures of how the Quencharc are supposed to be installed. The TB206.pdf document only shows 1 of the pictures for me. Does it only take 1 across the 2 coil terminals or does it go across the 2 power lines as well on the contactor?

cnckeith
Posts: 520
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none
Contact:

Re: Quencharc

Post by cnckeith » Sun Dec 03, 2017 9:11 am

Snubbers (quencharc) are installed Across coils
from the Acorn Schematics Library, schematic #S14826 download here. http://www.centroidcnc.com/centroid_diy ... matics.zip

snubber_1600.jpg
acorn snubberJPG.JPG

dbunyip
Posts: 9
Joined: Sun Nov 12, 2017 12:08 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none

Re: Quencharc

Post by dbunyip » Sun Dec 03, 2017 7:12 pm

On 220v they go across L2 and L2 at the motor?

cnckeith
Posts: 520
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none
Contact:

Re: Quencharc

Post by cnckeith » Sun Dec 03, 2017 7:24 pm


Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest