Power supply with both +24VDC and +5VDC

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
martyscncgarage
Posts: 739
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none
Location: Mesa, AZ

Power supply with both +24VDC and +5VDC

Post by martyscncgarage » Fri Dec 01, 2017 11:31 am

If you need +5VDC along with +24VDC to power Acorn, www.jameco.com is my source.
RD-35B
https://www.jameco.com/z/RD-35B-MEAN-WE ... 23380.html
Last edited by martyscncgarage on Fri Dec 01, 2017 1:00 pm, edited 1 time in total.
"Jack of all trades, master of none!"
Mesa, AZ

ScotY
Posts: 307
Joined: Sat Sep 23, 2017 7:57 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: none
Location: Honolulu, HI

Re: Power supply with both +24VDC and +5VDC

Post by ScotY » Fri Dec 01, 2017 12:56 pm

Hi Marty,
Your links don’t seem to be working. Can you post the part number?

martyscncgarage
Posts: 739
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none
Location: Mesa, AZ

Re: Power supply with both +24VDC and +5VDC

Post by martyscncgarage » Fri Dec 01, 2017 1:00 pm

ScotY wrote:
Fri Dec 01, 2017 12:56 pm
Hi Marty,
Your links don’t seem to be working. Can you post the part number?
Weird
Jameco.com
RD-35B
"Jack of all trades, master of none!"
Mesa, AZ

ScotY
Posts: 307
Joined: Sat Sep 23, 2017 7:57 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: none
Location: Honolulu, HI

Re: Power supply with both +24VDC and +5VDC

Post by ScotY » Fri Dec 01, 2017 3:04 pm

Thanks, Marty...the original link is also fixed.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests