Introduction, been browsing the forum about a month and I plan on purchasing Acorn Board in the near future. Location Indiana. As I've come to discover most online retailers don't do an adequate job of identifying touch vs non-touch monitors/displays.
Nonetheless I've compiled a list of (touchscreen OR touch-screen) monitors/displays. Figured I'd be a good samaritan since it is the holiday season and pass it along to fellow enthusiasts. The list might be worthy of a becoming a sticky, I'll let the moderators be the judge.
If anyone finds this useful give me a shout, also if the Centroid Family wants to show me some love I won't complain !
I hope the list is at least beneficial to a few enthusiasts. Happy holidays and keep on plotting/plugging!
Spear
Touchscreen / Touch-screen Monitor List 19" to 27"
Moderator: cnckeith
-
- Posts: 7
- Joined: Wed Nov 29, 2017 7:26 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 7348
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Touchscreen / Touch-screen Monitor List 19" to 27"
great!! thanks!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 2196
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: Touchscreen / Touch-screen Monitor List 19" to 27"
IS there a preferred screen resolution? I.E. 1920 x 1080 vs 1600 x 900? Sorry if I haven't seen this answer, I would like to go small as possible on my lathe build, but don't want to have to buy 2 monitors.
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Touchscreen / Touch-screen Monitor List 19" to 27"
Asus VT168H 15.5" Touchscreen monitors work fine with CNC12. I have them on two machines.
https://www.asus.com/us/Monitors/VT168H/
https://www.asus.com/us/Monitors/VT168H/
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 2196
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: Touchscreen / Touch-screen Monitor List 19" to 27"
Thanks Marty..
I was looking to go small, the 15 is even smaller than the 19's I was looking at. Better yet
I was looking to go small, the 15 is even smaller than the 19's I was looking at. Better yet
-
- Posts: 7
- Joined: Wed Nov 29, 2017 7:26 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Touchscreen / Touch-screen Monitor List 19" to 27"
I was curious with regard to the same question, thanks for asking!Gary Campbell wrote: ↑Thu Nov 30, 2017 10:38 am IS there a preferred screen resolution? I.E. 1920 x 1080 vs 1600 x 900?
I was going to compile a 15-19" list, but first go around there were not enough options to justify a separate list, from memory it was only like 3-5 options currently available. I might go ahead and do a second scan for 9-19" touch screen monitors.
Once you go down to 7" you get into the rPi territory, and its hard to delineate between products.
Ryan