Diffrence between "Pro" and "Ultimate" software

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
dhspring
Posts: 2
Joined: Mon Nov 13, 2017 3:59 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: none

Diffrence between "Pro" and "Ultimate" software

Post by dhspring » Mon Nov 13, 2017 4:07 pm

My question is : what is the difference between the : "pro" and the "ultimate" software ? I have a Chevalier- FCL-1840A with the Anilam 1200T system that is giving us fits and I was looking at the Allin1DC retro. Thanks!

Centroid_Tech
Posts: 154
Joined: Thu Mar 18, 2010 2:24 pm

Re: Diffrence between "Pro" and "Ultimate" software

Post by Centroid_Tech » Mon Nov 13, 2017 4:55 pm

You can see the differences between the different versions of the CNC12 software with the ACORN board here http://www.centroidcnc.com//centroid_di ... oller.html. As of right now, the CNC12 software is only for the ACORN board. It will be available with the ALLIN1DC in the near future.

Centroid_Liviu
Posts: 272
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none

Re: Diffrence between "Pro" and "Ultimate" software

Post by Centroid_Liviu » Mon Nov 13, 2017 4:58 pm

The Pro and Ultimate are software levels for the Acorn board (the Acorn page has what is included with the levels). For the ALLIN1DC the included Centroid software is more or less close to "Pro" on the Acorn but they are not identical as the Acorn is a stepper control and the ALLIN1DC is a fully closed loop servo control, so the capabilities differ.

What kind of servomotors are on the Chevalier Lathe? The ALLIN1DC can handle up to about 40in-lb, 180VDC, 15amp servomotors. I don't see that machine as having an automatic tool turret, so no additional I/O boards or tool changer support would be needed.

dhspring
Posts: 2
Joined: Mon Nov 13, 2017 3:59 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: none

Re: Diffrence between "Pro" and "Ultimate" software

Post by dhspring » Tue Nov 21, 2017 11:13 am

SEM type: MTS30m4-38, no: TO4940 DC brush 140v 47a, C stall torque26Lb/in 8.6 a,

Centroid_Liviu
Posts: 272
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none

Re: Diffrence between "Pro" and "Ultimate" software

Post by Centroid_Liviu » Tue Nov 21, 2017 11:35 am

Those should work great with the ALLIN1DC. Would just need encoders installed if none that are differential quadrature at least 1000 line count.

converterking
Posts: 35
Joined: Fri Mar 19, 2010 2:38 pm

Re: Diffrence between "Pro" and "Ultimate" software

Post by converterking » Wed Nov 22, 2017 12:15 pm

Do you have an estimate when cnc12 for the allin1dc will be released??

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest